Allowed weight
The Allowed value determined using the current Trucks Registered Gross Weight (RGW) and Allowable Gross Weight (AGW).
If RGW and AGW are both not 0 and are not equal, the Allowed value is the lesser of the two.
If RGW and AGW are both not 0 and are equal, the Allowed value is set to the value of RGW.
Over/Under
The Over/Under value is the the difference between the current scale weight and the Allowed value for the current Truck. Over/Under is calculated by subtracting the Allowed value from the current scale weight:
Over/Under = Scale weight - Allowed
When a Truck is overloaded, Over/Under will be a positive number (e.g. +980).
When a Truck is underloaded, Over/Under will be a negative number (e.g. -270).
If Allowed contains no value, Dispatch does not calculate an Over/Under amount.
Over weight
If the current scale weight is over (above) the Allowed value, the Over/Under value will be a positive number (e.g. 60980 - 60000 = +980). If you try to complete a transaction while an over weight condition exists, a Error or Warning message will be displayed.
Overload error
The Error image to the left of the Over/Under caption indicates that an error message will be displayed if the Print button is pressed.
If you try to weigh a Truck that is overloaded and that Truck is not allowed to be weighed when it is overloaded, an Error message will be displayed:
Overload warning
The Warning image to the left of the Over/Under caption indicates that an warning message will be displayed if the Print button is pressed.
If you try to weigh a Truck that is overloaded and that Truck is allowed to be weighed when it is overloaded, an Warning message will be displayed:
Under weight
If the current scale weight is less than or equal to the Allowed value, the Over/Under value will be a number less than or equal to 0 (e.g. 59370 - 60000 = -270).
Disabling Over/Under weight detection
Over/Under weight detection is disabled when a Truck's Allowed weight is 0.
When a Truck's Registered Gross Weight and Allowable Gross Weight are both 0, it's Allowed weight is calculated to be 0.
When an Allowed weight is 0, the Allowed and Over/Under values are not displayed.
