Adding a new Scale Definition

  1. Click the Add a new definition item on the Tasks group or press Ctrl+N.

  2. On the General tab of the Properties control:

    1. Type a name to identify the definition at the Name prompt.

      The name should identify the scale, for example: Scale1, Scale2, Inbound, Outbound. If you are using a laptop and are connecting to scales at different location that are not identical, you could use the location name to identify the definition.

       

    2. Select the type of indicator from the Type combo box.

      The type should match the indicator that is connected to your scale. You may need to contact us or the service technician that looks after your scale for help determining which Type you should use.

       

    3. Accept the default settings for the type of indicator you selected.

  3. On the Communication Port of the Properties control:

    1. Select the Name of communication port that the scale indicator is connected to.

    2. The default settings for the rest of the controls on the Communication Port tab will be set to the defaults for the indicator Type you selected.

      If you need to, adjust the Baud rate, Parity, Data bit and Stop bit settings so that they match the settings used by your indicator. Again, you may need to contact us or your service technician for help.

       

  4. To save the new definition, click Save changes on Tasks group or press Ctrl+S.